Matt steel or silver wedding arras (the thirteen coins): what really changes

Matt steel or silver wedding arras (the thirteen coins): what really changes

Silver arras tarnish and gold-plated ones lose their plating. Matt stainless steel arras do neither, and they also do not produce glare in photos. This page compares what really changes, not what sounds best.

See the matt steel arras Arras, Corpus and ceremony
By Javi · Updated: 31 July 2026
Matt stainless steel arras are thirteen 27 mm coins made of stainless steel with a matt, non-reflective finish, laser-engraved. Compared with silver they need no cleaning, and compared with gold plating there is no layer that can wear away.

The glare problem almost nobody thinks about

Arras are photographed up close, with flash or the harsh light of a church. A polished surface throws that light back as glare that hides exactly what you wanted to see: the engraving. That is why we chose a matt finish rather than a mirror one.

The second problem is time. Arras are kept for decades in a box, and silver reacts with the air and darkens; restoring it means cleaning it, and cleaning a fine engraving ends up rounding off the lines. Stainless steel does not rust and the engraving stays the same without you doing anything.

And the third is price, though not in the obvious sense: the set of thirteen costs €99, which leaves room for what is really noticeable, such as the engraving of your signatures and the little wooden box, instead of spending it on the metal.

The matt steel set and its presentation

What is compared above, and the pieces worth putting your budget into.

What each option gains and loses

Upkeep: none versus periodic cleaning

Stainless steel needs no care. Silver darkens in storage and has to be cleaned, with the risk of losing definition in the engraving each time.

Photography: matt versus mirror

The matt finish gives no glare, so the engraving can be read in close-up photos. A polished coin gives reflections right at the point where they are handed over.

Durability of the engraving

The laser modifies the surface of the steel: there is no ink or plating that can wear away. On plated pieces, the wearing of the plating takes the contrast of the design with it.

What silver does have

Weight and tradition. A silver coin feels heavier in the hand, and for some families the material has a value of its own. If that is what you are after, steel is no substitute, and it is only fair to say so.

Frequently asked questions

Does stainless steel rust?

Not in the conditions arras will be kept in. That is why it is used in cutlery and in everyday jewellery.

Can you tell they are not silver?

You can tell by the weight if you compare the two in your hand. In a photograph, a matt finish usually looks better than a polished one, because it produces no glare.

How much do matt steel arras cost?

€99 for the complete set of thirteen coins, with the engraving of names, date or words included, and sent in a little cloth bag.

Can I have both, steel and a luxury presentation?

Yes, and it is what makes the most sense: the matt steel set and the little wooden box engraved with your names as the presentation, instead of spending the budget on the metal.

Are steel ones suitable for a religious ceremony?

Yes. There is no rule about the material of the arras, in either a religious or a civil wedding.

No cleaning, no glare and the engraving intact

Thirteen matt stainless steel coins for €99, engraved with whatever you decide. The budget goes on what shows.

See the matt steel arras